Opens in a new tab
BlogQuestions & answersCareer

Pressure Vessels: 5 Critical Inspection Points

The safe operation of technical equipment is a fundamental prerequisite for protecting the health of employees, property and the stability of production processes. In the case of pressure vessels, this aspect is particularly critical. In these vessels, the energy of a pressurised medium is accumulated and can be released suddenly in the event of a failure, with consequences comparable to an explosion. For this reason, Slovak legislation classifies selected pressure equipment as classified technical equipment and lays down requirements for its expert inspections, tests, repairs and operation in accordance with occupational health and safety regulations.

In practice, however, the greatest risks arise where unfavourable factors combine, such as pressure, temperature, corrosion, material fatigue, leaks or the failure of protective elements. European Directive 2014/68/EU is based on the principle that pressure equipment must be safe under foreseeable operating conditions. In operation, it is therefore decisive to continuously monitor the technical condition of the equipment and ensure the reliable functioning of its safety elements.

Where does the greatest risk arise in pressure vessels?

The most critical parts of a pressure vessel are those subject to the highest mechanical and thermal stress or where defects develop unseen, without immediate visible signs. In practice, these are above all the bottoms and lower parts of vessels, where condensate and impurities accumulate, as well as welded joints, nozzles, flanges and the connection points of valves and fittings. Areas exposed to repeated changes in pressure and temperature, where the material suffers fatigue stress, also pose an increased risk.

Internal corrosion, erosion and cracking most frequently develop at these points, and the damage may not be visible during a routine check.

Safety elements also play a fundamental role. A non-functional safety valve means a loss of control over the equipment, which can quickly lead to an emergency situation.

The 5 most common non-conforming conditions in pressure vessels

1. A non-functional or unverified safety valve

The safety valve is the last barrier against exceeding the maximum allowable pressure. If it is incorrectly designed, fouled, incorrectly set, blocked or has not been verified for a long time, its relieving capacity may be reduced and the valve may fail to perform its protective function.

In practice, this is one of the most serious shortcomings, because a safety valve failure often only becomes apparent in a critical situation. The highest risk arises where the equipment is operated with fluctuating pressure, where maintenance has been neglected or after unauthorised servicing.

2. Internal corrosion of the vessel

Corrosion is one of the most dangerous failure mechanisms in pressure vessels, because it often progresses unseen over a long period, without external signs. It arises mainly as a result of condensate, moisture, aggressive components of the medium, deposits or insufficient blowdown. The gradual loss of material reduces the wall thickness and thus the safety margin of the vessel.

The highest risk tends to be at the bottom of the vessel, in dead spaces, at blowdown points and in zones where the medium stagnates locally. Here the wall can weaken without the operating personnel noticing during normal operation.

3. A missing or illegible nameplate

The nameplate is not a formality. It contains essential identification and technical data, such as the manufacturer, volume, maximum allowable pressure, permissible temperature and the identification of the equipment. Without these data, it is harder to assess whether the vessel is operated in the correct regime and whether the correct inspection and operating requirements apply. The European framework for pressure equipment is built precisely on unambiguous identification and conformity with safety requirements.

In practice, an illegible nameplate can lead to the incorrect setting of safety elements, the mixing-up of equipment or unqualified maintenance. The risk is particularly high with older equipment, refurbished vessels or where verifiable documentation is missing.

4. Inaccurate or non-functional measuring instruments

The pressure gauge, thermometer, level gauge and other monitoring elements are of fundamental importance for safe decision-making by operating personnel. If they measure inaccurately or are mechanically damaged, the operator may fail to recognise a dangerous rise in pressure or a deviation from the normal condition. Professional safety guidance therefore emphasises the need for accurate and clearly visible measuring instruments when setting and checking pressure systems.

The greatest risk arises when operating personnel trust incorrect readings. In such a case, the equipment may operate outside the safe range without the problem being identified in time.

5. Unqualified interventions and repairs

Unqualified repairs, unauthorised welds, interventions in the vessel shell or the replacement of valves and fittings without respecting the technological and safety requirements are among the riskiest failings. The Slovak legal framework expressly provides that repairs, maintenance, expert inspections and tests of classified technical equipment are subject to professional competence and prescribed rules.

An unqualified repair can alter the stress distribution in the material, weaken a welded joint or reduce resistance to cyclic loading. Weld zones in particular are sensitive to the formation of cracks, corrosion cracking and fatigue damage.

What should an inspection of pressure vessels focus on in practice?

An effective inspection of a pressure vessel should concentrate on three areas: the condition of the shell and welds, the condition of the safety and measuring equipment and the consistency of the documentation with the actual operating condition.

In practice, this means monitoring above all corrosion, deformation and leaks, as well as signs of overheating or unqualified interventions in the structure. At the same time, it is essential to verify the functioning of the safety valves, the accuracy of the pressure gauges and the legibility of the equipment’s identification data.

Conclusion

The most common non-conforming conditions in pressure vessels do not arise by chance. In most cases, they are the result of neglected maintenance, insufficient inspection, non-functional protective elements or unqualified interventions.

That is why regular inspections of pressure vessels and the performance of official tests and expert inspections and expert tests are among the most important preventive measures in the field of technical equipment safety.

Thorough inspections and tests, functional safety elements, reliable measurement and professionally performed repairs form the basis of safe and reliable operation.

Useful links

Insured Events in Industry: Why Technical Equipment Safety Is Decisive

Insurance claims in industry: why the safety of technical equipment is decisive

Act No. 124/2006 Coll. on occupational health and safety and on amendments to certain acts (in Slovak)

Decree No. 508/2009 Coll. laying down details for ensuring occupational health and safety when working with technical equipment (in Slovak)