BlogQuestions & answersCareer

Authorisation to Manufacture LV Switchboards: Does the Law Require It?

Do you manufacture low-voltage switchboards and a customer, a contracting authority or a public office has asked you to provide an “authorisation to manufacture switchboards”? The question is who issues such an authorisation and where to obtain it. The answer surprises many.

Slovak legislation does not recognise any authorisation to manufacture LV switchboards, and no legal regulation requires one. The manufacture of switchboards is an unregulated trade and a switchboard is a designated product. The manufacturer demonstrates its safety through conformity assessment and an EU declaration of conformity, not through an authorisation. In this article, we explain where this legal position comes from and when, by contrast, an authorisation is required.

What does the Trade Licensing Act say?

The manufacture of switchboards is an unregulated trade (in Slovak: voľná živnosť). The list of recommended names of unregulated trades published by the Ministry of the Interior of the Slovak Republic includes, under item 15 “Manufacture of computer, electronic and optical products and of electrical equipment and components”, an explicit reference to “manufacture of electric motors, switchboards, cables and batteries”, including the manufacture of electrical distribution and control equipment, switchboards and distribution panels. For an unregulated trade, it is sufficient to meet the general conditions for operating a trade; no professional competence or special document is required.

At the same time, the manufacture of switchboards is not listed among the craft trades or the regulated trades. The craft trade “Installation, reconstruction and maintenance of classified technical equipment” and the regulated trade “Repairs, expert inspections and expert tests of classified technical equipment” concern activities on equipment in operation, not the manufacture of a new product.

Why do the rules on classified technical equipment not apply to manufacture?

The regime of classified technical equipment is governed by Act No. 124/2006 Coll. and Decree No. 508/2009 Coll. Section 2(2) of the Decree expressly states that it does not apply to technical equipment that is a designated product until it is placed on the market or put into service. An LV switchboard is a designated product, so its manufacture does not fall under the regime of classified technical equipment at all.

An authorisation pursuant to Section 15(1) of Act No. 124/2006 Coll. is required only for expert inspections and expert tests, for repairs of classified technical equipment and for filling pressure vessels for gas transport. Under Section 3(a) of Decree No. 508/2009 Coll., a repair is an activity on existing technical equipment, including its reconstruction and installation, aimed at ensuring its functional and safe condition. The manufacture of a new product is not such an activity. A document called an “authorisation to manufacture switchboards” therefore has no basis in legislation and cannot be required from the manufacturer.

What obligations does a switchboard manufacturer actually have?

The fact that no authorisation is required does not mean that the manufacture of switchboards is unregulated. On the contrary, it is regulated, only under a different legal regime. An LV switchboard is a designated product under Act No. 56/2018 Coll. on conformity assessment of products, and Government Regulation No. 148/2016 Coll. applies to it (the Low Voltage Directive, LVD, for electrical equipment with a voltage of 50 to 1,000 V AC), as do, as a rule, the regulations on electromagnetic compatibility. The manufacturer must therefore, in particular:

  • design and manufacture the switchboard in accordance with the technical requirements, in practice according to the STN EN IEC 61439 series of standards,
  • carry out design verification and routine verification of each switchboard manufactured,
  • draw up and keep the technical documentation,
  • issue an EU declaration of conformity and affix the CE (Conformité Européenne) conformity marking to the product,
  • hand over the accompanying documentation, including the instructions, to the customer.

It is these documents that demonstrate that the switchboard is safe and may be placed on the market. We have explained how the CE marking works and how it is obtained in the article What Is CE Marking and How to Obtain It.

When do you actually need an authorisation?

The situation is different when a company not only manufactures switchboards but also carries out repairs and reconstructions of existing switchboards in operation. This is already an activity on classified electrical technical equipment, which requires the relevant craft or regulated trade. If such an activity is carried out by an employer, the employer also needs an authorisation to carry out repairs pursuant to Section 15 of Act No. 124/2006 Coll., issued by an authorised legal entity. An authorisation is therefore not required for manufacture. The persons who carry out this work must have professional competence in electrical engineering pursuant to Decree No. 508/2009 Coll.

What should you do if someone asks you for an authorisation?

In practice, manufacturers encounter the requirement for an “authorisation to manufacture switchboards” when notifying a trade, in public procurement and from customers. Documents issued by various organisations under this name can also be found. Such a document is at most a voluntary confirmation; it does not replace the obligations of the manufacturer of a designated product and does not fulfil any legal requirement.

If someone asks you for an authorisation to manufacture, it is sufficient to provide a trade licence for the unregulated trade. Legislation does not recognise any other authorisation to manufacture. The manufacturer issues an EU declaration of conformity only for a switchboard that has already been manufactured, before it is placed on the market, so it cannot be required in advance as a condition for manufacture. If the conformity of a manufactured switchboard needs to be demonstrated independently, it can be assessed or certified by an accredited body.

If a contracting authority or a customer wants to verify that the manufacturer produces to a consistent quality and manages production systematically, it may require a certificate of a quality management system according to STN EN ISO 9001. Such a certificate is issued by an accredited certification body and demonstrates the company’s ability to manage the quality of production, not an authorisation to manufacture. More information is available on the page Certification of quality management systems.

Conclusion

Legislation does not require any special authorisation to manufacture low-voltage (LV) switchboards.

The manufacture of LV switchboards is an unregulated trade, and the safety of a switchboard as a designated product is demonstrated through conformity assessment, an EU declaration of conformity and the CE marking. An authorisation pursuant to Section 15 of Act No. 124/2006 Coll. relates to repairs, installation and reconstruction of equipment in operation and to expert inspections and expert tests, which are entirely different activities. Anyone who understands this difference knows which documents to request from a supplier and which requirements can be rejected as unfounded.

Interesting links

Certification of quality management systems

What Is CE Marking and How to Obtain It: Rules, Process and Obligations

Who is an authorised legal entity (OPO) and when does your company need one?

Certification LVD – Low-voltage devices

List of recommended names of unregulated trades, minv.sk (in Slovak)

Act No. 124/2006 Coll. on occupational health and safety (in Slovak)

Decree No. 508/2009 Coll. (in Slovak)

Government Regulation No. 148/2016 Coll. (in Slovak)