BlogQuestions & answersCareer

Why Are Crane Steel Wire Rope Inspections Essential?

Mechanical stress during lifting operations, exposure to the weather, corrosion and repeated bending over sheaves and drums cause fatigue damage to crane steel wire ropes, which accumulates throughout their service life. A rope failure could endanger safe crane operation.

Crane steel wire ropes are regarded as consumable items that must be replaced when inspection results show that their condition has deteriorated so much that continued operation could be dangerous.

Regular rope inspections are therefore essential for detecting emerging defects in time, ensuring the safety of personnel, preventing equipment failure and minimising downtime.

Periodic inspection intervals

The frequency of periodic inspections must be determined by a competent person, taking into account:

  • national regulations concerning steel wire rope applications,
  • the type of crane and the environmental conditions at the workplace,
  • the duty class of the equipment,
  • the results of the previous inspection,
  • experience gained from inspections of similar crane steel wire ropes,
  • how long the steel wire rope has been in use,
  • the frequency of use,
  • the crane manufacturer’s recommendations.

The competent person may order more frequent inspections than the legislation prescribes if the circumstances so require.

Scope of the steel wire rope inspection

According to ISO 4309, every steel wire rope must be inspected along its entire length. For very long ropes, with the agreement of authorised personnel, the inspection may be limited to the working length of the rope and at least five wraps on the drum.

Particular attention should be paid to critical areas and sections of the rope, including:

  • the anchorage on the drum,
  • any section at and near the rope termination,
  • any section that passes over one or more sheaves,
  • any part that passes through a safe load indicator incorporating sheaves,
  • any section that passes through the hook block,
  • the part of the rope that lies on the compensating sheave,
  • any section that passes through a spooling guide device,
  • any part of the rope that is exposed to heat,
  • sections that spool onto the drum, especially in the crossover zones, associated with
  • multi-layer spooling.

Inspection of the rope termination

The rope must be inspected close to its terminations, in particular at the point where the rope enters the termination. This is a critical area, as it is here that wires can break due to vibration, dynamic loads, the working environment and corrosion.

When inspecting the rope termination, the termination itself must also be examined to establish whether it is excessively worn or deformed. Rope terminations according to EN 12385-4 must meet the requirements of standards EN 13411-1 to 6.

Types of steel wire rope inspections

  1. Visual inspection: Visual inspection is the most basic form of steel wire rope inspection and can often reveal obvious signs of wear, corrosion or damage. It involves visually examining the entire length of the rope, paying close attention to critical areas such as end connections and sheaves.
  2. Magnetic rope testing (MRT): Magnetic rope testing uses a magnetic field to identify surface and near-surface defects in steel wire ropes. This method is particularly effective in detecting cracks, breaks and other forms of hidden damage that may not be visible to the naked eye during a visual inspection.
  3. Ultrasonic testing: Ultrasonic testing uses high-frequency sound waves to assess the internal condition of steel wire ropes. By analysing the reflected sound waves, inspectors can identify internal flaws such as broken wires or corrosion without having to dismantle the rope.

Inspection records

After every periodic inspection, authorised personnel must draw up a record of the steel wire rope inspection, stating the maximum period until the next periodic inspection.

Discard criteria for steel wire ropes

If the crane manufacturer has not provided any instructions on discarding the steel wire rope in the instructions for operation, and neither has the rope supplier or manufacturer, the individual discard criteria set out in clauses 6.2 to 6.7 of ISO 4309 apply.

If there is a significant change in the occurrence of rope damage, the cause of the change must be identified and, where possible, corrective measures taken. In such cases, the authorised person may decide to discard the rope, to shorten the period until the next periodic inspection or to change the discard criteria, for example by reducing the permitted number of visibly broken wires.

If only a short section of a long rope is damaged and its removal is technically feasible, the competent person may decide to remove the damaged section and keep the remaining length of the rope in operation, provided it is in good technical condition.

Conclusion

Steel wire ropes are characterised by high strength and durability. However, heavy loading and long-term operation lead to corrosion, wear, loss of cross-section, broken wires, a reduction in diameter and overall material fatigue, which reduces the rope’s load-bearing capacity and carries the risk of accidents and damage to property.

Regular inspection of steel wire ropes is therefore essential to ensure the safe handling of loads and to prevent breakdowns and serious occupational accidents.